Troubleshooting print results
Troubleshooting print results striped or colored printnya blurred results. To fix or solve it, we must know what the possible causes. Immediately, we see the cause of the prints or ngeprint striped or results come out but the colors blurred or faded.
1. There is an air bubble in the cartridge, so that air bubbles caused when repeated injections cartridge.
2. Print head is clogged by dried ink, the printer dikarnakan rarely used in the long term.
3. Print head is scratched or damaged due to the print head position changed because there is damage.
4. One cartridge installation, it also becomes possible causes.
5. There is an error on the computer settings. And maybe there are running out of ink for a particular color.
6. Charging too much ink, so the ink spilled on the bottom that causes blurred print results.
So what should we do to cope with striped prints and the colors blurred? The solution is to try to Clean the printer head by performing head cleaning for 2 to 4 times to remove air bubbles in the cartridge, replace the print head, make sure it really catridenya, turn off and turn back to meyakinakan that setatus cartridge has been changed.
Cartridge or replace old or damaged, keep benar2 not to open seal while the output movie striped bottom or not come out at all, check back and make sure when you do not print in draft print quality setting or super economy.
The latter is a solution which replace the print head that has been long or that have been damaged with a new one. Thus the article how to overcome blurred prints or prints colored stripes.
1. There is an air bubble in the cartridge, so that air bubbles caused when repeated injections cartridge.
2. Print head is clogged by dried ink, the printer dikarnakan rarely used in the long term.
3. Print head is scratched or damaged due to the print head position changed because there is damage.
4. One cartridge installation, it also becomes possible causes.
5. There is an error on the computer settings. And maybe there are running out of ink for a particular color.
6. Charging too much ink, so the ink spilled on the bottom that causes blurred print results.
So what should we do to cope with striped prints and the colors blurred? The solution is to try to Clean the printer head by performing head cleaning for 2 to 4 times to remove air bubbles in the cartridge, replace the print head, make sure it really catridenya, turn off and turn back to meyakinakan that setatus cartridge has been changed.
Cartridge or replace old or damaged, keep benar2 not to open seal while the output movie striped bottom or not come out at all, check back and make sure when you do not print in draft print quality setting or super economy.
The latter is a solution which replace the print head that has been long or that have been damaged with a new one. Thus the article how to overcome blurred prints or prints colored stripes.
0 Response to "Troubleshooting print results"
Post a Comment